Firstly:

POSITION and LAYOUT of the walls, passages, doors, windows, appliances, sockets, water
pipes etc. are firstly required to be considered before design. Because they are
extremely important to the cabinets layout and the following design. Also they might cause
issues during the installations if the important position is misplaced.

TOTAL WIDTH of Each finished Wall “AAA”, Doors(from walls to frames)”BBB”, free standing
Island ”CCC”, passage “DDD”, Windows (from walls to frames), etc. are required for the
Design or Confirmations of the final production drawings. Please make sure the total width is
enough for cabinets to fit in and walk by after we putting the 50mm fillers on each sides.

We will provide professional shop drawing for you to double check the dimension.According to the shop drawing,we will share how to check dimension.

1. Do the measurement with Elevations order: A-B-C-D-E to avoid missing.
2. Total Height from FINISHED Floor to WINDOWS, DOORS, BUILKHEAD, CEILING, SEMI HIGH WALL for ISLAND,
SOCKET, WATER OUTLET are required if there is cabinets by . The total height will effect the cabinets daily use or
installation which might cause issues that the cabinets block the view of window or cover the sockets and outlet.
3. Total Width of each Elevation if the same as floor plan
Refer to CAD